3 Smart Moves For Taking Care Of Your Hot Water Heater

Your hot water heater provides your home with all the hot water you need to get through everyday life, allowing you to wash your clothes, dishes, and yourself. When it comes to taking care of your hot water heater, there are a few smart moves you can make to ensure you get as much usage as possible from your hot water heater.

Smart Move #1: Don't Max Out the Temperature

When it comes to taking care of your hot water heater, one of the things you need to do is watch the temperature on your hot water heater. Maxing out the temperature on your hot water heater is going to put more stress on the system. Most hot water heaters are designed to heat water up to 130-140 degrees Fahrenheit; however, you don't really need your water that hot.

Instead, set your water heater to around 120-degrees Fahrenheit; this is more than hot enough for sanitation purposes and low enough to not stress out your water heater. By setting your water heater to 120-degrees Fahrenheit, you should save some money on the operation of your hot water heater, as well.

Smart Move #2: Insulate Your Water Heater

Your hot water heater could use a little insulation to help keep the water tank warm. Wrapping an insulated blanket around your hot water heater will help the tank better retain heat, keeping the water hot for a longer period of time.

You should also place insulation around all the exposed pipes on the water heater as well. The better you insulate your water heater, the better job it will do of keeping your water warm, saving you money and reducing stress on the heater itself.

Smart Move #3: Get a Professional Tune-Up

If you really want your water heater to run effectively, schedule a yearly professional tune-up. During this yearly tune-up, the plumber should both inspect the burner assemble for wear and damage and clean the assembly. They should inspect and repair the exhaust flue if you have either a gas or oil-based water heater. The plumber will let you know if it is time to replace the anode rod. They should also check for and address any leaks or corrosion from the unit.

If you want to get lots of years of usage out of your hot water heater, don't max out the temperature, be sure to insulate your water heater, and get a professional tune-up at least once a year.